History

Liu_Weichao e14fa6ff8e modify XiUOS DIR : (1.add plc_demo in APP_Framework/control_app; 2.add industrial_network、industrial_fieldbus and industrial_wlan; 3.add XiZi_AIoT and modify XiZi as XiZi_IIoT.)		2022-09-27 20:39:52 +08:00
..
img	modify XiUOS DIR : (1.add plc_demo in APP_Framework/control_app; 2.add industrial_network、industrial_fieldbus and industrial_wlan; 3.add XiZi_AIoT and modify XiZi as XiZi_IIoT.)	2022-09-27 20:39:52 +08:00
third_party_driver	modify XiUOS DIR : (1.add plc_demo in APP_Framework/control_app; 2.add industrial_network、industrial_fieldbus and industrial_wlan; 3.add XiZi_AIoT and modify XiZi as XiZi_IIoT.)	2022-09-27 20:39:52 +08:00
Kconfig	modify XiUOS DIR : (1.add plc_demo in APP_Framework/control_app; 2.add industrial_network、industrial_fieldbus and industrial_wlan; 3.add XiZi_AIoT and modify XiZi as XiZi_IIoT.)	2022-09-27 20:39:52 +08:00
Makefile	modify XiUOS DIR : (1.add plc_demo in APP_Framework/control_app; 2.add industrial_network、industrial_fieldbus and industrial_wlan; 3.add XiZi_AIoT and modify XiZi as XiZi_IIoT.)	2022-09-27 20:39:52 +08:00
README.md	modify XiUOS DIR : (1.add plc_demo in APP_Framework/control_app; 2.add industrial_network、industrial_fieldbus and industrial_wlan; 3.add XiZi_AIoT and modify XiZi as XiZi_IIoT.)	2022-09-27 20:39:52 +08:00
board.c	modify XiUOS DIR : (1.add plc_demo in APP_Framework/control_app; 2.add industrial_network、industrial_fieldbus and industrial_wlan; 3.add XiZi_AIoT and modify XiZi as XiZi_IIoT.)	2022-09-27 20:39:52 +08:00
board.h	modify XiUOS DIR : (1.add plc_demo in APP_Framework/control_app; 2.add industrial_network、industrial_fieldbus and industrial_wlan; 3.add XiZi_AIoT and modify XiZi as XiZi_IIoT.)	2022-09-27 20:39:52 +08:00
config.mk	modify XiUOS DIR : (1.add plc_demo in APP_Framework/control_app; 2.add industrial_network、industrial_fieldbus and industrial_wlan; 3.add XiZi_AIoT and modify XiZi as XiZi_IIoT.)	2022-09-27 20:39:52 +08:00
link.ld	modify XiUOS DIR : (1.add plc_demo in APP_Framework/control_app; 2.add industrial_network、industrial_fieldbus and industrial_wlan; 3.add XiZi_AIoT and modify XiZi as XiZi_IIoT.)	2022-09-27 20:39:52 +08:00

README.md

CH32V307VCT6-board README

1. 简介

硬件	描述
芯片型号	ch32v307
CPU	单核RV32GC
主频	144MHz
片内SRAM	可配最大128KB
外设
	GPIO、UART

2. 编译说明

编译环境：Ubuntu18.04

编译工具链：riscv-none-embed-gcc ( xPack GNU RISC-V Embedded GCC)
xPack RISC-V Embedded GCC 工具链可以使用xpm工具进行安装:

$ xpm install --global @xpack-dev-tools/riscv-none-embed-gcc@8.2.0-3.1.1

编译步骤：

1.将编译工具链的路径添加到board/ch32v307vct6/config.mk文件当中，例如将xpack-riscv-none-elf-gcc解压到/opt/下时添加：

export CROSS_COMPILE ?=/opt/riscv-embedded-gcc/bin/riscv-none-embed-

2.在代码根目录下执行以下命令，生成配置文件

cd ./Ubiquitous/XiZi
make BOARD=ch32v307vct6 distclean
make BOARD=ch32v307vct6 menuconfig

3.在menuconfig界面配置需要关闭和开启的功能，按回车键进入下级菜单，按Y键选中需要开启的功能，按N键选中需要关闭的功能，配置结束后选择Exit保存并退出 4.继续执行以下命令，进行编译

make BOARD=ch32v307vct6

5.如果编译正确无误，会产生XiZi-ch32v307vct6.elf、XiZi-ch32v307vct6.bin文件。其中XiZi-ch32v307vct6.bin需要烧写到设备中进行运行。注：最后可以执行以下命令，清除配置文件和编译生成的文件

make BOARD=ch32v307vct6 distclean

3. 烧写及执行

开发板可使用数据线通过USB接口与电脑连接，将开发板的Boot0接口通电（连接VCC）后按动ReSet按钮，即可使用烧录工具WCHISPTool进行烧录。烧录工具的配置如下图所示。

烧录完成后可通过串口连接PC电脑与开发版，TX(PA9)接串口RX、RX(PA10)接串口TX。

3.1 运行结果

如果编译 & 烧写无误，将开发板BOOT引脚与VCC引脚断开后重新上电或将RESET引脚短接一下，将会在串口终端上看到信息打印输出。